Falgsc-al at 21:09, 2 November 2020

2020-11-02T21:09:24Z

Legg at 21:08, 2 November 2020

2020-11-02T21:08:23Z

Falgsc-al at 20:26, 2 November 2020

2020-11-02T20:26:43Z

Falgsc-al: This page is a modified demo that came with the new LCD board.

2020-11-02T20:23:14Z

This page is a modified demo that came with the new LCD board.

New page

/***********************************************************************************
*This program is a demo of displaying string
*This demo was made for LCD modules with 8bit or 16bit data port.
*This program requires the the LCDKIWI library.

* File : display_string.ino
* Hardware Environment: Arduino UNO&Mega2560
* Build Environment : Arduino

*Set the pins to the correct ones for your development shield or breakout board.
*This demo use the BREAKOUT BOARD only and use these 8bit data lines to the LCD,
*pin usage as follow:
* LCD_CS LCD_CD LCD_WR LCD_RD LCD_RST SD_SS SD_DI SD_DO SD_SCK
* Arduino Uno A3 A2 A1 A0 A4 10 11 12 13
*Arduino Mega2560 A3 A2 A1 A0 A4 10 11 12 13

* LCD_D0 LCD_D1 LCD_D2 LCD_D3 LCD_D4 LCD_D5 LCD_D6 LCD_D7
* Arduino Uno 8 9 2 3 4 5 6 7
*Arduino Mega2560 8 9 2 3 4 5 6 7

*Remember to set the pins to suit your display module!
*
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**********************************************************************************/

#include <LCDWIKI_GUI.h> //Core graphics library
#include <LCDWIKI_KBV.h> //Hardware-specific library

//if the IC model is known or the modules is unreadable,you can use this constructed function
LCDWIKI_KBV mylcd(ILI9486,A3,A2,A1,A0,A4); //model,cs,cd,wr,rd,reset
//if the IC model is not known and the modules is readable,you can use this constructed function
//LCDWIKI_KBV mylcd(320,480,A3,A2,A1,A0,A4);//width,height,cs,cd,wr,rd,reset

//define some colour values
#define BLACK 0x0000
#define BLUE 0x001F
#define RED 0xF800
#define GREEN 0x07E0
#define CYAN 0x07FF
#define MAGENTA 0xF81F
#define YELLOW 0xFFE0
#define WHITE 0xFFFF

void setup()
{
Serial.begin(9600);
mylcd.Init_LCD();
Serial.println(mylcd.Read_ID(), HEX);
mylcd.Fill_Screen(BLACK);
}

void loop()
{
mylcd.Set_Text_Mode(0);
//display 1 times string
mylcd.Fill_Screen(0x0000);
mylcd.Set_Text_colour(RED);
mylcd.Set_Text_Back_colour(BLACK);
mylcd.Set_Text_Size(3);
mylcd.Print_String("Battery Monitor", 0, 0);
//mylcd.Print_Number_Float(01234.56789, 2, 0, 8, '.', 0, ' ');
//mylcd.Print_Number_Int(0xDEADBEF, 0, 16, 0, ' ',16);
//mylcd.Print_String("DEADBEF", 0, 16);

//display 2 times string
mylcd.Set_Text_colour(GREEN);
mylcd.Set_Text_Size(2);
mylcd.Print_String("Made by Caleb\nand Tim", 0, 40);
//mylcd.Print_Number_Float(01234.56789, 2, 0, 56, '.', 0, ' ');
//mylcd.Print_Number_Int(0xDEADBEF, 0, 72, 0, ' ',16);
//mylcd.Print_String("DEADBEEF", 0, 72);

//display 3 times string
mylcd.Set_Text_colour(BLUE);
mylcd.Set_Text_Size(2);
mylcd.Print_String("Battery 1", 0, 100);
//mylcd.Print_Number_Float(01234.56789, 2, 0, 128, '.', 0, ' ');
//mylcd.Print_Number_Int(0xDEADBEF, 0, 152, 0, ' ',16);
// mylcd.Print_String("DEADBEEF", 0, 152);

//display 4 times string
mylcd.Set_Text_colour(WHITE);
mylcd.Set_Text_Size(2);
mylcd.Print_String("Battery 2", 0, 140);

//display 5 times string
mylcd.Set_Text_colour(YELLOW);
mylcd.Set_Text_Size(2);
mylcd.Print_String("Battery 3", 0, 180);

//display 6 times string
mylcd.Set_Text_colour(RED);
mylcd.Set_Text_Size(2);
mylcd.Print_String("Battery 4", 0, 220);

delay(3000);

← Older revision		Revision as of 21:09, 2 November 2020
Line 103:		Line 103:

	delay(3000);		delay(3000);
		+	}
	</syntaxhighlight>		</syntaxhighlight>

@@ Line 1: / Line 1: @@
-<syntaxhighlight lang="C++" line='line'>
+<syntaxhighlight lang="C++">
 /***********************************************************************************
 *This program is a demo of displaying string

LCD demo - Revision history

Falgsc-al at 21:09, 2 November 2020

Legg at 21:08, 2 November 2020

Falgsc-al at 20:26, 2 November 2020

Falgsc-al: This page is a modified demo that came with the new LCD board.