LCD demo

/***********************************************************************************
*This program is a demo of displaying string
*This demo was made for LCD modules with 8bit or 16bit data port.
*This program requires the the LCDKIWI library.

* File                : display_string.ino
* Hardware Environment: Arduino UNO&Mega2560
* Build Environment   : Arduino

*Set the pins to the correct ones for your development shield or breakout board.
*This demo use the BREAKOUT BOARD only and use these 8bit data lines to the LCD,
*pin usage as follow:
*                  LCD_CS  LCD_CD  LCD_WR  LCD_RD  LCD_RST  SD_SS  SD_DI  SD_DO  SD_SCK 
*     Arduino Uno    A3      A2      A1      A0      A4      10     11     12      13                            
*Arduino Mega2560    A3      A2      A1      A0      A4      10     11     12      13                           

*                  LCD_D0  LCD_D1  LCD_D2  LCD_D3  LCD_D4  LCD_D5  LCD_D6  LCD_D7  
*     Arduino Uno    8       9       2       3       4       5       6       7
*Arduino Mega2560    8       9       2       3       4       5       6       7 

*Remember to set the pins to suit your display module!
*
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE 
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**********************************************************************************/

#include <LCDWIKI_GUI.h> //Core graphics library
#include <LCDWIKI_KBV.h> //Hardware-specific library

//if the IC model is known or the modules is unreadable,you can use this constructed function
LCDWIKI_KBV mylcd(ILI9486,A3,A2,A1,A0,A4); //model,cs,cd,wr,rd,reset
//if the IC model is not known and the modules is readable,you can use this constructed function
//LCDWIKI_KBV mylcd(320,480,A3,A2,A1,A0,A4);//width,height,cs,cd,wr,rd,reset

//define some colour values
#define  BLACK   0x0000
#define BLUE    0x001F
#define RED     0xF800
#define GREEN   0x07E0
#define CYAN    0x07FF
#define MAGENTA 0xF81F
#define YELLOW  0xFFE0
#define WHITE   0xFFFF

void setup() 
{
  Serial.begin(9600);
  mylcd.Init_LCD();
  Serial.println(mylcd.Read_ID(), HEX);
  mylcd.Fill_Screen(BLACK);
}

void loop() 
{
  mylcd.Set_Text_Mode(0);
  //display 1 times string
  mylcd.Fill_Screen(0x0000);
  mylcd.Set_Text_colour(RED);
  mylcd.Set_Text_Back_colour(BLACK);
  mylcd.Set_Text_Size(3);
  mylcd.Print_String("Battery Monitor", 0, 0);
  //mylcd.Print_Number_Float(01234.56789, 2, 0, 8, '.', 0, ' ');  
  //mylcd.Print_Number_Int(0xDEADBEF, 0, 16, 0, ' ',16);
  //mylcd.Print_String("DEADBEF", 0, 16);

  //display 2 times string
  mylcd.Set_Text_colour(GREEN);
  mylcd.Set_Text_Size(2);
  mylcd.Print_String("Made by Caleb\nand Tim", 0, 40);
  //mylcd.Print_Number_Float(01234.56789, 2, 0, 56, '.', 0, ' ');  
  //mylcd.Print_Number_Int(0xDEADBEF, 0, 72, 0, ' ',16);
  //mylcd.Print_String("DEADBEEF", 0, 72);

  //display 3 times string
  mylcd.Set_Text_colour(BLUE);
  mylcd.Set_Text_Size(2);
  mylcd.Print_String("Battery 1", 0, 100);
  //mylcd.Print_Number_Float(01234.56789, 2, 0, 128, '.', 0, ' ');  
  //mylcd.Print_Number_Int(0xDEADBEF, 0, 152, 0, ' ',16);
 // mylcd.Print_String("DEADBEEF", 0, 152);

  //display 4 times string
  mylcd.Set_Text_colour(WHITE);
  mylcd.Set_Text_Size(2);
  mylcd.Print_String("Battery 2", 0, 140);

  //display 5 times string
  mylcd.Set_Text_colour(YELLOW);
  mylcd.Set_Text_Size(2);
  mylcd.Print_String("Battery 3", 0, 180);

  //display 6 times string
  mylcd.Set_Text_colour(RED);
  mylcd.Set_Text_Size(2);
  mylcd.Print_String("Battery 4", 0, 220);

  delay(3000);
}