EPEVER 485
Contents
Synopsis
Issues 485 request and display result
Notes
9000-9100 Registers
0xFFFF9000 : 0x00 0xFFFF9001 : 0x70 0xFFFF9002 : 0x00 0xFFFF9003 : 0x86 0xFFFF9004 : 0x68 0xFFFF9005 : 0x5E 0xFFFF9006 : 0x54 0xFFFF9007 : 0x54 0xFFFF9008 : 0xC8 0xFFFF9009 : 0x50 0xFFFF900A : 0x00 0xFFFF900B : 0x00 0xFFFF900C : 0x60 0xFFFF900D : 0xAC 0xFFFF900E : 0x48 0xFFFF900F : 0x00 0xFFFF9010 : 0x64 0xFFFF9011 : 0x00 0xFFFF9012 : Error 0x02 0xFFFF9013 : 0x27 0xFFFF9014 : 0x15 0xFFFF9015 : 0x0B 0xFFFF9016 : 0x1E 0xFFFF9017 : 0x4C 0xFFFF9018 : 0x00 0xFFFF9019 : 0x1C 0xFFFF901A : 0x40 0xFFFF901B : 0x34 0xFFFF901C : 0x4C 0xFFFF901D : 0x02 0xFFFF901E : 0xE8 0xFFFF901F : 0x0A 0xFFFF9020 : 0xB0 0xFFFF9021 : 0x0A 0xFFFF9022 : Error 0x02 0xFFFF9023 : Error 0x02 0xFFFF9024 : Error 0x02 0xFFFF9025 : Error 0x02 0xFFFF9026 : Error 0x02 0xFFFF9027 : Error 0x02 0xFFFF9028 : Error 0x02 0xFFFF9029 : Error 0x02 0xFFFF902A : Error 0x02 0xFFFF902B : Error 0x02 0xFFFF902C : Error 0x02 0xFFFF902D : Error 0x02 0xFFFF902E : Error 0x02 0xFFFF902F : Error 0x02 0xFFFF9030 : Error 0x02 0xFFFF9031 : Error 0x02 0xFFFF9032 : Error 0x02 0xFFFF9033 : Error 0x02 0xFFFF9034 : Error 0x02 0xFFFF9035 : Error 0x02 0xFFFF9036 : Error 0x02 0xFFFF9037 : Error 0x02 0xFFFF9038 : Error 0x02 0xFFFF9039 : Error 0x02 0xFFFF903A : Error 0x02 0xFFFF903B : Error 0x02 0xFFFF903C : Error 0x02 0xFFFF903D : 0x00 0xFFFF903E : 0x00 0xFFFF903F : 0x00 0xFFFF9040 : Error 0x02 0xFFFF9041 : Error 0x02 0xFFFF9042 : 0x00 0xFFFF9043 : 0x00 0xFFFF9044 : 0x13 0xFFFF9045 : 0x00 0xFFFF9046 : 0x00 0xFFFF9047 : 0x06 0xFFFF9048 : 0x00 0xFFFF9049 : 0x00 0xFFFF904A : 0x13 0xFFFF904B : 0x00 0xFFFF904C : 0x00 0xFFFF904D : 0x06 0xFFFF904E : Error 0x02 0xFFFF904F : Error 0x02 0xFFFF9050 : Error 0x02 0xFFFF9051 : Error 0x02 0xFFFF9052 : Error 0x02 0xFFFF9053 : Error 0x02 0xFFFF9054 : Error 0x02 0xFFFF9055 : Error 0x02 0xFFFF9056 : Error 0x02 0xFFFF9057 : Error 0x02 0xFFFF9058 : Error 0x02 0xFFFF9059 : Error 0x02 0xFFFF905A : Error 0x02 0xFFFF905B : Error 0x02 0xFFFF905C : Error 0x02 0xFFFF905D : Error 0x02 0xFFFF905E : Error 0x02 0xFFFF905F : Error 0x02 0xFFFF9060 : Error 0x02 0xFFFF9061 : Error 0x02 0xFFFF9062 : Error 0x02 0xFFFF9063 : 0x1E 0xFFFF9064 : 0x02 0xFFFF9065 : 0x00 0xFFFF9066 : Error 0x02 0xFFFF9067 : 0x02 0xFFFF9068 : Error 0x02 0xFFFF9069 : 0x00 0xFFFF906A : 0x00 0xFFFF906B : 0x78 0xFFFF906C : 0x50 0xFFFF906D : 0x1E 0xFFFF906E : 0x50 0xFFFF906F : 0x28 0xFFFF9070 : 0x00 0xFFFF9071 : Error 0x02 0xFFFF9072 : Error 0x02 0xFFFF9073 : Error 0x02 0xFFFF9074 : Error 0x02 0xFFFF9075 : Error 0x02 0xFFFF9076 : Error 0x02 0xFFFF9077 : Error 0x02 0xFFFF9078 : Error 0x02 0xFFFF9079 : Error 0x02 0xFFFF907A : Error 0x02 0xFFFF907B : Error 0x02 0xFFFF907C : Error 0x02 0xFFFF907D : Error 0x02 0xFFFF907E : Error 0x02 0xFFFF907F : Error 0x02 0xFFFF9080 : Error 0x02 0xFFFF9081 : Error 0x02 0xFFFF9082 : Error 0x02 0xFFFF9083 : Error 0x02 0xFFFF9084 : Error 0x02 0xFFFF9085 : Error 0x02 0xFFFF9086 : Error 0x02 0xFFFF9087 : Error 0x02 0xFFFF9088 : Error 0x02 0xFFFF9089 : Error 0x02 0xFFFF908A : Error 0x02 0xFFFF908B : Error 0x02 0xFFFF908C : Error 0x02 0xFFFF908D : Error 0x02 0xFFFF908E : Error 0x02 0xFFFF908F : Error 0x02 0xFFFF9090 : 0x00 0xFFFF9091 : 0x00 0xFFFF9092 : 0x00 0xFFFF9093 : 0x00 0xFFFF9094 : 0x57 0xFFFF9095 : 0x00 0xFFFF9096 : 0x00 0xFFFF9097 : 0x38 0xFFFF9098 : 0xEE 0xFFFF9099 : Error 0x02 0xFFFF909A : Error 0x02 0xFFFF909B : Error 0x02 0xFFFF909C : Error 0x02 0xFFFF909D : Error 0x02 0xFFFF909E : Error 0x02 0xFFFF909F : Error 0x02 0xFFFF90A0 : 0x00 0xFFFF90A1 : 0x00 0xFFFF90A2 : 0x00 0xFFFF90A3 : 0x00 0xFFFF90A4 : 0x00 0xFFFF90A5 : Error 0x02 0xFFFF90A6 : Error 0x02 0xFFFF90A7 : Error 0x02 0xFFFF90A8 : Error 0x02 0xFFFF90A9 : Error 0x02 0xFFFF90AA : Error 0x02 0xFFFF90AB : Error 0x02 0xFFFF90AC : Error 0x02 0xFFFF90AD : Error 0x02 0xFFFF90AE : Error 0x02 0xFFFF90AF : Error 0x02 0xFFFF90B0 : 0xD2 0xFFFF90B1 : 0x60 0xFFFF90B2 : 0x13 0xFFFF90B3 : 0x7A 0xFFFF90B4 : 0x00 0xFFFF90B5 : 0xA7 0xFFFF90B6 : 0x89 0xFFFF90B7 : 0x35 0xFFFF90B8 : 0x75 0xFFFF90B9 : 0x87 0xFFFF90BA : 0x00 0xFFFF90BB : 0x00 0xFFFF90BC : Error 0x02 0xFFFF90BD : 0x00 0xFFFF90BE : 0x00 0xFFFF90BF : 0xE0 0xFFFF90C0 : Error 0x02 0xFFFF90C1 : Error 0x02 0xFFFF90C2 : Error 0x02 0xFFFF90C3 : Error 0x02 0xFFFF90C4 : Error 0x02 0xFFFF90C5 : Error 0x02 0xFFFF90C6 : Error 0x02 0xFFFF90C7 : Error 0x02 0xFFFF90C8 : Error 0x02 0xFFFF90C9 : Error 0x02 0xFFFF90CA : Error 0x02 0xFFFF90CB : Error 0x02 0xFFFF90CC : Error 0x02 0xFFFF90CD : Error 0x02 0xFFFF90CE : Error 0x02 0xFFFF90CF : Error 0x02 0xFFFF90D0 : Error 0x02 0xFFFF90D1 : Error 0x02 0xFFFF90D2 : Error 0x02 0xFFFF90D3 : Error 0x02 0xFFFF90D4 : Error 0x02 0xFFFF90D5 : Error 0x02 0xFFFF90D6 : Error 0x02 0xFFFF90D7 : Error 0x02 0xFFFF90D8 : Error 0x02 0xFFFF90D9 : Error 0x02 0xFFFF90DA : Error 0x02 0xFFFF90DB : Error 0x02 0xFFFF90DC : Error 0x02 0xFFFF90DD : Error 0x02 0xFFFF90DE : Error 0x02 0xFFFF90DF : Error 0x02 0xFFFF90E0 : Error 0x02 0xFFFF90E1 : Error 0x02 0xFFFF90E2 : Error 0x02 0xFFFF90E3 : Error 0x02 0xFFFF90E4 : Error 0x02 0xFFFF90E5 : Error 0x02 0xFFFF90E6 : Error 0x02 0xFFFF90E7 : Error 0x02 0xFFFF90E8 : Error 0x02 0xFFFF90E9 : Error 0x02 0xFFFF90EA : Error 0x02 0xFFFF90EB : Error 0x02 0xFFFF90EC : Error 0x02 0xFFFF90ED : Error 0x02 0xFFFF90EE : Error 0x02 0xFFFF90EF : Error 0x02 0xFFFF90F0 : Error 0x02 0xFFFF90F1 : Error 0x02 0xFFFF90F2 : Error 0x02 0xFFFF90F3 : Error 0x02 0xFFFF90F4 : Error 0x02 0xFFFF90F5 : Error 0x02 0xFFFF90F6 : Error 0x02 0xFFFF90F7 : Error 0x02 0xFFFF90F8 : Error 0x02 0xFFFF90F9 : Error 0x02 0xFFFF90FA : Error 0x02 0xFFFF90FB : Error 0x02 0xFFFF90FC : Error 0x02 0xFFFF90FD : Error 0x02 0xFFFF90FE : Error 0x02 0xFFFF90FF : Error 0x02
Code
1 //#include <SoftwareSerial.h>
2 //const int SSERIAL_RX_PIN = 10; //Soft Serial Receive pin
3 //const int SSERIAL_TX_PIN = 11; //Soft Serial Transmit pin
4
5 // Create Soft Serial Port object and define pins to use
6 //SoftwareSerial RS485Serial(SSERIAL_RX_PIN, SSERIAL_TX_PIN); // RX, TX
7
8 #define DEVICE 0x01
9 #define BUFS 64 //Buffer size
10 short crc;
11 byte arry[6] = {0x00, 0x02, 0x02, 0x00, 0x02, 0x00};
12 byte Response[BUFS];
13 byte Response_size;
14 byte countdown = 2;
15 //===============================================================================
16 // Initialization
17 //===============================================================================
18 void setup()
19 {
20 Serial.begin(115200); // Start the built-in serial port
21 Serial1.begin(115200); // Start the RS485 soft serial port
22 delay(1000);
23 Serial.println();
24 }
25
26
27 //===============================================================================
28 // Main
29 //===============================================================================
30 void loop()
31 {
32
33 Response_size=zerothree(Response,0x9013,0x0003 );
34
35 Serial.print("Size is : ");
36 Serial.println(Response_size);
37
38 Serial.print("Response string is : ");
39 for(byte i=0;i<Response_size;i++)
40 {
41 Serial.print("0x");
42 if(Response[i]<16) Serial.print("0");
43 Serial.print(Response[i],HEX);
44 Serial.print(" ");
45 }
46 Serial.println();
47
48 while(1)
49 {}
50 }
51 // Read coils zeroone - Read up to 2000 coils in a call.
52 // Requires:
53 // byte rs[] : Respose[]
54 // int start : starting address
55 // int num : Number of coils between 1..0x07D0
56 //
57 byte zeroone(byte rs[],int start, int num)
58 {
59 byte rq[8]; //Always 8 bytes for 0x01
60 short c; //CRC value
61 byte i, j,sz; //Counters, size
62
63 //If there are no parameters selected or too many, then error, quit.
64 if(num==0 || num>0x07d0)
65 {
66 Serial.println("Illegal quantity of inputs");
67 return 0;
68 }
69
70
71 rq[0]=DEVICE; //Global device IO
72 rq[1]=0x01;
73 rq[3]=byte(start&0x00FF); //starting LSB address
74 rq[2]=byte((start&0xFF00)>>8);//starting MSB address
75 rq[5]=byte(num&0x00FF); //number of coils LSB
76 rq[4]=byte((num&0xFF00)>>8); //number of coils MSB
77
78 c = CRC16(rq,6); //Calculate CRC
79
80 rq[7]=0x00FF & c; //CRC LSB
81 rq[6]=c>>8; //CRC MSB
82
83
84 //Transmit the Request array onto bus.
85 for(i=0;i<8;i++)
86 {
87 Serial1.write(rq[i]);
88 }
89
90 //Because the number of coils is in bits and they are returned as bytes, modulo artithmetic
91 //is needed to ensure a fractional byte always rounds upwards to an additioanl byte
92 sz=5+num/8;
93 if(num%8>0) sz++;
94
95 if(sz>BUFS)
96 {
97 Serial.println("Buffer overflow prevented in 0x01. Recompile with BUFS to a higher value");
98 return 0;
99 }
100 for(i=0;i<sz;)
101 {
102 if (Serial1.available()) //Data from the Slave is available
103 {
104 rs[i]=Serial1.read();
105 if(i==1 && rs[i]==0x83) sz=5; //Error packet is much shorter, always 5.
106 i++;
107 }
108 }
109 if (rs[1]==0x83)
110 {
111 Serial.println("Remote system threw an error.");
112 return 0;
113 }
114 c=CRC16(rs,sz-2);
115 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
116 {
117 Serial.println("CRC error in 'Read Coils' function 0x01");
118 return 0;
119 }
120 return sz;
121 }
122
123 // Read discretes zerotwo - Read up to 2000 discrete inputs in a call.
124 // Requires:
125 // byte rs[] : Respose[]
126 // int start : starting address
127 // int num : Number of inputs between 1..0x07D0
128 //
129 byte zerotwo(byte rs[], int start, int num)
130 {
131 byte rq[8]; //Always 8 bytes
132 short c; //CRC value
133 byte i, j,sz; //Counters, size
134
135 rq[0]=DEVICE; //Global device IO
136 rq[1]=0x02;
137 rq[3]=byte(start&0x00FF); //Starting address LSB
138 rq[2]=byte((start&0xFF00)>>8); //Starting address MSB
139 rq[5]=byte(num&0x00FF); //Number of bits LSB
140 rq[4]=byte((num&0xFF00)>>8); //Number of bits MSB
141
142 c = CRC16(rq,6);
143 rq[7]=0x00FF & c; //CRC LSB written
144 rq[6]=c>>8; //CRC MSB written
145
146
147 //Deliver request to device
148 for(i=0;i<8;i++)
149 {
150 Serial1.write(rq[i]);
151 }
152
153 //Because the number of coils is in bits and they are returned as bytes, modulo artithmetic
154 //is needed to ensure a fractional byte always rounds upwards to an additional byte
155 sz=5+num/8;
156 if(num%8>0) sz++;
157
158 if(sz>BUFS)
159 {
160 Serial.println("Buffer overflow prevented in 0x02. Recompile with BUFS to a higher value");
161 return 0;
162 }
163
164 //Listen for response
165 for(i=0;i<sz;)
166 {
167 if (Serial1.available()) //Data from the Slave is available
168 {
169 rs[i]=Serial1.read();
170 if(i==1 && rs[i]==0x83) sz=5; //Error packet is much shorter, always 5.
171 i++;
172 }
173 }
174 if (rs[1]==0x83)
175 {
176 Serial.println("Remote system threw an error.");
177 return 0;
178 }
179
180 //Verify CRC code
181 c=CRC16(rs,sz-2);
182 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
183 {
184 Serial.println("CRC error in 0x02");
185 return 0;
186 }
187 return sz;
188 }
189
190 // Read Holding Registers zerothree - Read up to 125 registers in a call.
191 // Requires:
192 // byte rs[] : Response[]
193 // int start : starting address
194 // int num : Number of inputs between 1..0x0007D
195 //
196 // Note: Even though the number of inputs will never exceed 8 bits,
197 // the standard requires a 16-bit type cast.
198 byte zerothree(byte rs[],int start, int num)
199 {
200 byte rq[8];
201 short c; //CRC value
202 byte i, j,sz; //Counters, size
203
204 if(num==0 || num>0x007d)
205 {
206 Serial.println("Illegal quantity of inputs");
207 return 0;
208 }
209
210
211 rq[0]=DEVICE; //Global device IO
212 rq[1]=0x03;
213 rq[3]=byte(start&0x00FF);
214 rq[2]=byte((start&0xFF00)>>8);
215 rq[5]=byte(num&0x00FF);
216 rq[4]=0x00; //The number of registers MSB is always zero
217
218 //Calculate and store CRC
219 c = CRC16(rq,6);
220 rq[7]=0x00FF & c;
221 rq[6]=c>>8;
222
223 //Deliver request to device
224 for(i=0;i<8;i++)
225 {
226 Serial1.write(rq[i]);
227 }
228 sz = 5+num*2;
229 if(sz>BUFS)
230 {
231 Serial.println("Buffer overflow prevented in 0x03. Recompile with BUFS to a higher value");
232 return 0;
233 }
234 //Listen for Response
235 for(i=0;i<sz;)
236 {
237 if (Serial1.available()) //Data from the Slave is available
238 {
239 rs[i]=Serial1.read();
240 if(i==1 && rs[i]==0x83) sz=5;
241 i++;
242 }
243 }
244 if (rs[1]==0x83)
245 {
246 Serial.println("Remote system threw an error.");
247 return 0;
248 }
249 c=CRC16(rs,sz-2);
250 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
251 {
252 Serial.println("CRC error in 0x03");
253 return 0;
254 }
255
256 return sz;
257 }
258
259
260 // Read Input Registers zerofour - Read up to 125 registers in a call.
261 // Requires:
262 // byte rs[] : Response[]
263 // int start : starting address
264 // int num : Number of inputs between 1..0x0007D
265
266 byte zerofour(byte rs[],int start, int num)
267 {
268 byte rq[8]; //Always 8 bytes
269 //int addr;
270 //int len;
271 short c; //CRC value
272 byte i, j,sz; //Counters, size
273
274 if(num==0 || num>0x007d)
275 {
276 Serial.println("Illegal quantity of inputs");
277 return 0;
278 }
279
280 rq[0]=DEVICE; //Global device IO
281 rq[1]=0x04;
282 rq[3]=byte(start&0x00FF); //LSB of starting register
283 rq[2]=byte((start&0xFF00)>>8); //MSB of starting register
284 rq[5]=byte(num&0x00FF);
285 rq[4]=0x00; //This is always zero for this function
286
287 c = CRC16(rq,6); //Generate CRC
288 rq[7]=0x00FF & c; //Write LSB of CRC
289 rq[6]=c>>8; //Write MSB of CRC
290
291 //Deliver request to device
292 for(i=0;i<8;i++)
293 {
294 Serial1.write(rq[i]);
295 }
296 sz = 5+num*2;
297 if(sz>BUFS)
298 {
299 Serial.println("Buffer overflow prevented in 0x04. Recompile with BUFS to a higher value");
300 return 0;
301 }
302 //Listen for Response
303 for(i=0;i<sz;)
304 {
305 if (Serial1.available()) //Data from the Slave is available
306 {
307 rs[i]=Serial1.read();
308 if(i==1 && rs[i]==0x83) sz=5;
309 i++;
310 }
311 }
312
313 if (rs[1]==0x83)
314 {
315 Serial.println("Remote system threw an error.");
316 return 0;
317 }
318 c=CRC16(rs,sz-2);
319 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
320 {
321 Serial.println("CRC error in 0x04");
322 return 0;
323 }
324
325 return sz;
326 }
327
328 // Write Single Coil zerofive - Write a coild 0xFF00 or 0x0000.
329 // Requires:
330 // byte rs[] : Response[]
331 // int start : starting address
332 // bool set : State of coil LOW or HIGH
333 byte zerofive(byte rs[],int addr, bool set)
334 {
335 byte rq[8]; //Always 8 bytes
336 short c; //CRC value
337 byte i, j,sz; //Counters, size
338
339
340 rq[0]=DEVICE; //Global device IO
341 rq[1]=0x05;
342 rq[3]=byte(addr&0x00FF);
343 rq[2]=byte((addr&0xFF00)>>8);
344 rq[4]=0x00; //Always zero
345 if(set) rq[5]=0xFF;
346 else rq[5]=0x00;
347
348
349 c = CRC16(rq,6);
350 rq[7]=0x00FF & c;
351 rq[6]=c>>8;
352
353 //Deliver request to device
354 for(i=0;i<8;i++)
355 {
356 Serial1.write(rq[i]);
357 }
358
359 sz = 6; //Always 6 fore this function
360 if(sz>BUFS)
361 {
362 Serial.println("Buffer overflow prevented in 0x03. Recompile with BUFS to a higher value");
363 return 0;
364 }
365
366 //Listen for Response
367 for(i=0;i<sz;)
368 {
369 if (Serial1.available()) //Data from the Slave is available
370 {
371 rs[i]=Serial1.read();
372 if(i==1 && rs[i]==0x83) sz=5;
373 i++;
374 }
375 }
376
377 if (rs[1]==0x83)
378 {
379 Serial.println("Remote system threw an error.");
380 return 0;
381 }
382
383 c=CRC16(rs,sz-2);
384
385 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
386 {
387 Serial.println("CRC error in 0x05");
388 return 0;
389 }
390 }
391
392
393 // Write multiple registers onezero - Read up to 123 registers in a call.
394 // Requires:
395 // byte rs[] : Response[]
396 // int start : starting address
397 // int num : Number of inputs between 1..0x0007B
398 // byte arr[]: Array containing registers being written
399 byte onezero(byte rs[],int start, int num, byte arr[])
400 {
401 byte rq[255];
402 short c; //CRC value
403 byte i, j,sz; //Counters, size
404
405 if(num==0 || num>0x7B)
406 {
407 Serial.println("Invalid number of registers being written in 0x10.");
408 return 0;
409 }
410 rq[0]=DEVICE; //Global device IO
411 rq[1]=0x10;
412 rq[3]=byte(start&0x00FF);
413 rq[2]=byte((start&0xFF00)>>8);
414 rq[5]=byte(num&0x00FF);
415 rq[4]=0x00; //always zero
416 rq[6]=num<<1; //num*2
417
418 for(int i=0;i<(num<<1);i++)
419 {
420 rq[7+i]=arr[i];
421 }
422
423 c = CRC16(rq,7+(num<<1));
424 rq[8+(num<<1)]=0x00FF & c;
425 rq[7+(num<<1)]=c>>8;
426
427 for(i=0;i<9+(num<<1);i++)
428 {
429 Serial1.write(rq[i]);
430 }
431
432 sz = 9+(num<<1); //9 byzes + 2*num
433 if(sz>BUFS)
434 {
435 Serial.println("Buffer overflow prevented in 0x04. Recompile with BUFS to a higher value");
436 return 0;
437 }
438
439 sz=8; //This response is always 8 bytes long
440 //Listen for Response
441 for(i=0;i<sz;)
442 {
443 if (Serial1.available()) //Data from the Slave is available
444 {
445 rs[i]=Serial1.read();
446 if(i==1 && rs[i]==0x83) sz=5;
447 i++;
448 }
449 }
450
451 if (rs[1]==0x83)
452 {
453 Serial.println("Remote system threw an error.");
454 return 0;
455 }
456
457
458 c=CRC16(rs,sz-2);
459 if(c!=short((rs[sz-2]<<8 | rs[sz-1])))
460 {
461 Serial.println("CRC error in 0x04");
462 return 0;
463 }
464 return sz;
465 }
466
467 short CRC16(byte array[],byte s)
468 {
469 static const byte auchCRCHi[] = {
470 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
471 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
472 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
473 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
474 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
475 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
476 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
477 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
478 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
479 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
480 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
481 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
482 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
483 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
484 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
485 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
486 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
487 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
488 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
489 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
490 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
491 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
492 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
493 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
494 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
495 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
496 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
497 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
498 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
499 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
500 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
501 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40} ;
502
503 static const byte auchCRCLo[] = {
504 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2,
505 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4, 0x04,
506 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E,
507 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8,
508 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A,
509 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC,
510 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6,
511 0xD2, 0x12, 0x13, 0xD3, 0x11, 0xD1, 0xD0, 0x10,
512 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
513 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4,
514 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE,
515 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38,
516 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA,
517 0xEE, 0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C,
518 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
519 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0,
520 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62,
521 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4,
522 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE,
523 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68,
524 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA,
525 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C,
526 0xB4, 0x74, 0x75, 0xB5, 0x77, 0xB7, 0xB6, 0x76,
527 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
528 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92,
529 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54,
530 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E,
531 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98,
532 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A,
533 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
534 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86,
535 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40} ;
536
537 byte uchCRCHi = 0xFF;
538 byte uchCRCLo = 0xFF;
539 byte uIndex;
540
541 while(s--)
542 {
543 uIndex = uchCRCHi ^ *array++ ;
544 uchCRCHi = uchCRCLo ^ auchCRCHi[uIndex] ;
545 uchCRCLo = auchCRCLo[uIndex] ;
546 }
547 return short(uchCRCHi << 8 | uchCRCLo);
548 }
